+91 75880 82870
Rajyaseva Setu
← All fundamentals

Geography · Contemporary India II · Chapter 5

Minerals and Energy Resources

Minerals are finite, non-renewable, and unevenly distributed. This chapter covers how minerals form and are classified, India's major ferrous/non-ferrous/non-metallic mineral belts, mining hazards and conservation, and conventional plus non-conventional energy sources.

What is a mineral, and how does it occur

  • A mineral is a 'homogeneous, naturally occurring substance with a definable internal structure.' Over 2,000 minerals are identified, but few are abundant. Classified as metallic (ferrous — iron, manganese, nickel, cobalt; non-ferrous — copper, lead, tin, bauxite; precious — gold, silver, platinum), non-metallic (mica, salt, potash, sulphur, limestone, etc.), and energy minerals (coal, petroleum, natural gas).
  • Occurrence: (i) in igneous/metamorphic rocks, in cracks/crevices/faults as veins (smaller) or lodes (larger), formed when molten/gaseous minerals rise and solidify — source of tin, copper, zinc, lead; (ii) in sedimentary rocks, in horizontal beds/layers from deposition (coal, some iron ore) or evaporation in arid regions (gypsum, potash, sodium salts); (iii) by decomposition of surface rocks leaving residual weathered material — bauxite forms this way; (iv) as placer/alluvial deposits in valley-floor sands, containing water-resistant minerals like gold, silver, tin, platinum; (v) dissolved in ocean water (common salt, magnesium, bromine) or in manganese nodules on the ocean bed.
  • Geographers study minerals' distribution and associated economic activity; geologists study their formation, age and composition. Rat-hole mining: in Meghalaya (tribal areas where minerals are individually/community owned, unlike India's mostly nationalised mineral rights), coal is mined via long narrow tunnels; the National Green Tribunal has declared this practice illegal.

Ferrous minerals

  • Ferrous minerals are ~three-fourths of metallic mineral production value. Iron ore: magnetite (finest, up to 70% iron, strong magnetic properties, valuable for electrical industry) and hematite (most-used industrially, 50-60% iron). In 2018-19, 97% of production came from Odisha, Chhattisgarh, Karnataka and Jharkhand.
  • Four major iron-ore belts: Odisha-Jharkhand (hematite at Badampahar, Mayurbhanj, Kendujhar; Gua, Noamundi in Singhbhum); Durg-Bastar-Chandrapur (Bailadila hills, Chhattisgarh — 14 super-high-grade hematite deposits, exported via Vishakhapatnam to Japan/South Korea); Ballari-Chitradurga-Chikkamagaluru-Tumakuru (Karnataka — Kudremukh, a 100% export unit, ore sent as slurry pipeline to near Mangaluru); Maharashtra-Goa (lower quality but efficiently exploited, exported via Marmagao).
  • Manganese: used mainly for steel/ferro-manganese alloy (~10kg per tonne of steel), also bleaching powder, insecticides, paints. Leading producers (2018-19): Madhya Pradesh (33%), Maharashtra (27%), Odisha (16%), Karnataka (12%), Andhra Pradesh (10%).

Non-ferrous and non-metallic minerals

  • India's non-ferrous mineral reserves/production (copper, bauxite, lead, zinc, gold) are relatively poor, though these are vital for metallurgical, engineering and electrical industries. Copper: malleable, ductile, good conductor — used in cables/electronics/chemicals; leading mines at Balaghat (MP), Khetri (Rajasthan), Singhbhum (Jharkhand). Bauxite (a clay-like aluminium ore): deposits form from decomposition of aluminium-silicate-rich rocks, found mainly in the Amarkantak plateau, Maikal hills, Bilaspur-Katni plateau; Odisha was the largest producer (65%) in 2018-19, led by the Panchpatmali deposits in Koraput.
  • Mica: splits into thin, flexible sheets; excellent dielectric strength, low power loss, insulating, high-voltage resistant — indispensable in electric/electronic industries. Found on the northern Chota Nagpur plateau — Koderma-Gaya-Hazaribagh belt (Jharkhand) leads, with Ajmer (Rajasthan) and Nellore (Andhra Pradesh) also important. Limestone: found with calcium/calcium-magnesium carbonate rocks in sedimentary formations; basic raw material for cement and essential for smelting iron in blast furnaces; Rajasthan (22%) leads production (2018-19).

Mining hazards and mineral conservation

  • Miners face pulmonary disease from dust/fumes, and risk of collapsing roofs, inundation and fires. Water sources get contaminated; waste/slurry dumping degrades land and pollutes rivers. Stricter safety regulation and environmental law enforcement are essential to prevent mining becoming a 'killer industry'.
  • Workable mineral deposits are just ~1% of the earth's crust; formation takes millions of years, so minerals are finite/non-renewable — consumption rates vastly outpace replenishment. Continued extraction means greater depths and lower quality, raising costs. Conservation needs: planned, sustainable use; improved technology for low-grade ores; recycling and substitutes.

Conventional energy sources

  • Energy sources: conventional (firewood, cattle dung cake, coal, petroleum, natural gas, hydel/thermal electricity) and non-conventional (solar, wind, tidal, geothermal, biogas, atomic). Firewood + dung cake meet over 70% of rural household energy needs, but this is unsustainable as forest area shrinks, and dung-burning wastes valuable manure.
  • Coal forms in grades by compression: peat (low carbon, high moisture) → lignite (soft brown coal, high moisture; Neyveli, Tamil Nadu is the main reserve, used for power generation) → bituminous (most commercially used; metallurgical grade used for iron smelting) → anthracite (highest quality hard coal). Occurs in Gondwana rocks (>200 million years — Damodar valley/WB-Jharkhand: Jharia, Raniganj, Bokaro; also Godavari, Mahanadi, Son, Wardha valleys) and Tertiary deposits (~55 million years — Meghalaya, Assam, Arunachal Pradesh, Nagaland). Coal is bulky and loses weight on use, so heavy industry and thermal plants locate near coalfields.
  • Petroleum: found in tertiary-age anticlines/fault traps, where porous limestone/sandstone traps oil between non-porous layers (gas, being lighter, sits above oil). Mumbai High, Gujarat (Ankleshwar is Gujarat's most important field) and Assam (oldest oil-producing state — Digboi, Naharkatiya, Moran-Hugrijan) are major areas. Petroleum refineries are a 'nodal industry' for synthetic textiles, fertiliser and chemicals.
  • Natural gas: released with crude oil; used for power, industrial heating, chemicals/fertilisers, transport fuel (CNG) and cooking fuel (PNG). Major reserves: Mumbai High/west coast (plus Cambay basin), and newer finds in the Krishna-Godavari basin (east coast). GAIL's first HVJ (Hazira-Vijaipur-Jagdishpur) pipeline (1,700 km) linked Mumbai High/Bassein fields to northern/western industry; India's gas pipeline network has since expanded over tenfold to ~18,500 km, moving toward a 34,000 km national gas grid.
  • Electricity: generated by hydro turbines (fast-flowing water, renewable — e.g. Bhakra Nangal, Damodar Valley Corporation, Kopili) or thermal plants (burning coal/petroleum/natural gas, non-renewable). Per-capita electricity consumption is treated as a development index.

Non-conventional energy sources

  • Rising fossil-fuel prices, shortage risks and environmental damage push India toward renewables — solar, wind, tidal, biomass. Nuclear/atomic energy: from altering atomic structure; uses uranium/thorium (Jharkhand, Aravalli ranges of Rajasthan; Kerala's monazite sands are thorium-rich). Solar: photovoltaic technology, growing especially in rural/remote areas, reducing dependence on firewood/dung cake.
  • Wind: largest cluster Nagarcoil-to-Madurai (Tamil Nadu); also AP, Karnataka, Gujarat, Kerala, Maharashtra, Lakshadweep; Jaisalmer also notable. Biogas ('gobar gas' from cattle dung): higher thermal efficiency than kerosene/dung cake/charcoal, and improves manure quality while sparing trees. Tidal: floodgate dams across inlets, ideal sites at Gulf of Khambhat, Gulf of Kuchchh (Gujarat), and the Sunderbans (West Bengal). Geothermal: hot groundwater/steam from high geothermal-gradient zones drives turbines; experimental projects at Manikaran (Parvati valley, HP) and Puga Valley (Ladakh).
  • India is one of the least energy-efficient countries in the world, so conservation matters as much as new supply — using public transport, switching off unused electricity, power-saving devices, and non-conventional sources. As the chapter puts it: 'energy saved is energy produced.'

Key terms

Veins / Lodes
Smaller / larger mineral occurrences in cracks and faults of igneous/metamorphic rocks.
Placer deposits
Alluvial deposits in valley-floor sands containing water-resistant minerals like gold.
Magnetite / Hematite
India's two main iron ores — finest-quality magnetic ore vs. most industrially-used ore.
Bituminous / Anthracite coal
Most commercially-used coal grade / the highest-quality hard coal.
Conventional vs. non-conventional energy
Fossil fuel/hydel/thermal sources vs. solar, wind, tidal, geothermal, biogas, atomic.

Quick revision

  • 1.Iron-ore belts: Odisha-Jharkhand, Durg-Bastar-Chandrapur (Bailadila), Ballari-Chitradurga (Kudremukh), Maharashtra-Goa.
  • 2.Coal grades: peat → lignite → bituminous → anthracite; Gondwana (Damodar valley) vs Tertiary (NE states).
  • 3.Petroleum: Mumbai High, Gujarat (Ankleshwar), Assam (Digboi — oldest).
  • 4.Non-conventional: solar, wind (Tamil Nadu leads), tidal (Khambhat/Kuchchh/Sunderbans), geothermal (Manikaran, Puga), atomic (U/Th).

Practice questions

Try writing your own answer first, then compare with the notes above.

  1. 1.Explain the different modes of occurrence of minerals with examples.
  2. 2.Describe the distribution of iron ore in India.
  3. 3.Why does India need to promote non-conventional sources of energy?

These are original study notes prepared from the NCERT Class X textbook for exam preparation, not a reproduction of it. For the full text, maps and illustrations, read the original textbook on the official NCERT website (ncert.nic.in).