+91 75880 82870
Rajyaseva Setu
← All fundamentals

Geography · Contemporary India II · Chapter 6

Manufacturing Industries

Manufacturing — large-scale production of goods after processing raw materials — is the backbone of economic development. This chapter covers why manufacturing matters, how industries are classified, India's major agro- and mineral-based industries, and industrial pollution with its control.

Why manufacturing matters

  • Manufacturing modernises agriculture and reduces dependence on farm income by creating secondary/tertiary jobs; industrial development is a precondition for eradicating unemployment/poverty (the reasoning behind public-sector and joint-sector industries, and setting up units in tribal/backward areas to cut regional disparity); exports of manufactured goods bring foreign exchange; countries that convert raw material into diverse, higher-value finished goods prosper.
  • Agriculture and industry are interdependent: agro-industries raised farm productivity by supplying irrigation pumps, fertilisers, pesticides, pipes, tools, while depending on agriculture for raw material — a two-way relationship the chapter calls 'agriculturisation of industry and industrialisation of agriculture'. In a globalised world, self-sufficiency isn't enough — Indian goods must match international quality to compete.

Classification of industries

  • By raw material source: agro-based (cotton, woollen, jute, silk textiles, rubber, sugar, tea, coffee, edible oil) and mineral-based (iron-steel, cement, aluminium, machine tools, petrochemicals). By role: basic/key industries supply raw material to other industries (iron-steel, copper/aluminium smelting); consumer industries make goods for direct use (sugar, toothpaste, paper, sewing machines, fans).
  • By capital investment: small-scale industries are defined by a maximum asset-investment ceiling (currently ₹1 crore, revised over time). By ownership: public sector (government-run, e.g. BHEL, SAIL), private sector (e.g. TISCO, Bajaj Auto, Dabur), joint sector (state + private, e.g. Oil India Ltd.), cooperative sector (owned by raw-material producers/suppliers/workers pooling resources and sharing profit/loss — e.g. Maharashtra's sugar industry, Kerala's coir industry). By bulk/weight: heavy industries (iron and steel) vs. light industries (electrical goods).

Textile industry

  • The only Indian industry self-reliant across the entire value chain — fibre → spinning (yarn) → weaving/knitting (fabric) → dyeing/finishing → garment manufacture. The first successful cotton mill opened in Mumbai (1854); traditional hand-spinning/handloom industries declined under colonial competition from English mill-made cloth, though both World Wars (fought while India was a British colony) boosted demand and hence the industry.
  • Cotton textiles concentrated originally in Maharashtra/Gujarat's cotton belt (raw cotton, market, transport/ports, labour, moist climate). Spinning stays centralised in Maharashtra, Gujarat, Tamil Nadu; weaving is highly decentralised (handloom/powerloom/mills) to preserve traditional skills — India excels in spinning but weaving under-uses the high-quality yarn produced. Handspun khadi is a large cottage-industry employer (Gandhi's emphasis on khadi tied self-reliant spinning to the freedom movement).
  • Jute textiles: India is the largest producer of raw jute and jute goods, 2nd largest exporter after Bangladesh. First jute mill: Rishra, near Kolkata (1855). Mills concentrate along the Hugli river (West Bengal) due to nearness to jute-growing areas, cheap water transport, rail/road networks, abundant processing water, cheap labour from WB/Bihar/Odisha/UP, and Kolkata's banking/insurance/port facilities. After 1947 Partition, mills stayed in India but three-fourths of jute-growing land went to East Pakistan (Bangladesh).

Mineral-based industries

  • Iron and steel: the basic industry, since all other heavy/medium/light industries depend on it for machinery; needed for engineering goods, construction, defence, medical/telephonic/scientific equipment, consumer goods. Raw materials — iron ore, coking coal, limestone — combine roughly 4:2:1, plus manganese to harden steel; production process: blast furnace (melt ore, add limestone as flux, burn coke for heat) → pig iron (poured into moulds) → steel making (pig iron purified, manganese/nickel/chromium added) → shaping (rolling, pressing, casting, forging). Steel production/consumption is treated as a development index.
  • Iron and steel is heavy (bulky raw material + finished goods → high transport cost). Chota Nagpur plateau has the greatest concentration due to cheap iron ore, proximity of high-grade raw materials, cheap labour, and large domestic-market growth potential. Major plants: Bhilai, Rourkela, Durgapur, Bokaro, Jamshedpur, Burnpur, Vishakhapatnam, Bhadravati, Vijaynagar, Salem.
  • Aluminium smelting: 2nd most important metallurgical industry — light, corrosion-resistant, good heat conductor, malleable, stronger when alloyed; used in aircraft, utensils, wires, and as a substitute for steel/copper/zinc/lead. Bauxite (bulky, dark reddish) is converted: ~4-6 tonnes bauxite → 2 tonnes alumina → 1 tonne aluminium, needing large, cheap, reliable electricity (~18,600 kWh per tonne) as the key locational factor. Smelters located in Odisha, WB, Kerala, UP, Chhattisgarh, Maharashtra, Tamil Nadu.
  • Chemical industry: inorganic chemicals (sulphuric acid, nitric acid, alkalies, soda ash, caustic soda) are widely spread across the country; organic chemicals (petrochemicals — synthetic fibre, rubber, plastics, dyes, drugs) locate near oil refineries/petrochemical plants. Fertiliser industry: nitrogenous (mainly urea), phosphatic (DAP), and complex (N-P-K) fertilisers; potash is entirely imported (no commercial domestic reserves); expanded nationwide after the Green Revolution — Gujarat, Tamil Nadu, UP, Punjab, Kerala contribute about half of production.
  • Cement industry: needs bulky limestone, silica, gypsum, plus coal and electric power; first plant set up in Chennai (1904), expanded after Independence. Automobile industry: grew strongly post-liberalisation; located around Delhi, Gurugram, Mumbai, Pune, Chennai, Kolkata, Lucknow, Indore, Hyderabad, Jamshedpur, Bengaluru. IT/electronics industry: wide product range (transistors to computers/telecom equipment); Bengaluru is India's 'electronic capital', with Noida, Mumbai, Chennai, Hyderabad, Pune also major centres — a major generator of employment.

Industrial pollution and its control

  • Four types: air (SO2, CO, particulate dust/smoke from chemical/paper factories, brick kilns, refineries, smelters — e.g. the Bhopal gas tragedy), water (organic/inorganic effluents — dyes, detergents, acids, heavy metals like lead/mercury — mainly from paper, chemical, textile/dyeing, petroleum, tannery and electroplating industries; also thermal pollution from hot water discharge, and nuclear-plant waste), land (dumping of glass, chemicals, effluents, packaging, salts, garbage — contaminating soil and, via rainwater percolation, groundwater), and noise (machinery, generators, drills — causing hearing impairment, raised heart rate/blood pressure, stress).
  • Control measures: minimise/reuse/recycle processing water; harvest rainwater; treat hot water/effluents before release (three-phase treatment — primary/mechanical screening-sedimentation, secondary/biological, tertiary/biological-chemical-physical with wastewater recycling); regulate groundwater overdraw; fit smoke stacks with electrostatic precipitators, fabric filters, scrubbers; use oil/gas instead of coal; fit silencers on generators; use noise-absorbing material, earplugs/earphones. NTPC's approach (ISO 14001 EMS certification) is cited as a model — optimum equipment use, minimising waste via ash utilisation, green belts, ash-pond/water-recycling management, ecological monitoring.

Key terms

Basic/key vs. consumer industry
Supplies raw material to other industries vs. makes goods for direct use.
Iron ore : coking coal : limestone
Approximate 4:2:1 ratio needed for steel-making.
Basic chemicals: sulphuric acid, soda ash
Widely-used inorganic chemicals underpinning fertiliser, glass, soap, paper industries.
Thermal pollution
Water pollution from hot factory/plant discharge released without cooling.

Quick revision

  • 1.Classification: raw material (agro/mineral), role (basic/consumer), capital, ownership, bulk.
  • 2.Cotton: spinning centralised (Maharashtra/Gujarat/TN), weaving decentralised.
  • 3.Jute: Hugli belt, WB — largest producer, 2nd largest exporter after Bangladesh.
  • 4.Iron-steel ratio 4:2:1 (ore:coal:limestone); Chota Nagpur plateau = max concentration.
  • 5.4 types of industrial pollution: air, water, land, noise.

Practice questions

Try writing your own answer first, then compare with the notes above.

  1. 1.Classify industries on the basis of raw material and give two examples of each.
  2. 2.Explain the factors responsible for the location of the iron and steel industry in the Chota Nagpur region.
  3. 3.How do industries cause environmental pollution? Suggest measures to control it.

These are original study notes prepared from the NCERT Class X textbook for exam preparation, not a reproduction of it. For the full text, maps and illustrations, read the original textbook on the official NCERT website (ncert.nic.in).